The selected aggregate used in Crafco HFS features a high PSV/ PAFV (Polished Stone Value/Polished Aggregate Friction Value), generally in excess of +70, which ensures that the aggregate will not polish smooth but remain sharp. As the surface wears it micro fractures, retaining its high skid resistance property makes it an ideal long term application solution.
INSTALLATION
Prepare the surface that is to be treated by sweeping or blowing clean of any dirt and debris. Area must be completely dry. Tape off surface area to desired measurements.
1 - Mix the two part epoxy then add color if required and mix.
2 - Spread the epoxy evenly with
serrated squeegee over the surface.
3 - Spread and evenly coat the epoxy with aggregate.
4 -
Pull tape and allow the
expoxy to cure.
5 - Once the epoxy has cured sweep the surface of all loose stone.
Open to traffic.
> Part A MSDS < > Part B MSDS < > Data Sheet < > Application Instructions<