DETACK is supplied ready to use in 5 gallon (19L) plastic pails. To use, DETACK is poured into typical hand pump pressurized garden sprayers. The spray pattern should be adjusted to a medium fan. DETACK can be applied to the sealant immediately after sealant is placed, or at any time after sealant is placed when surface tack is present. Usage rate of DETACK is typically 1 gallon (3.8L) per 1000-2000 feet (305-610m) of sealed cracks. DETACK should be applied to cover the sealant surface with minimal excess of application onto the pavement surface. The use of this product in no way supersedes the warnings and instructions furnished with the sealant used. Follow Application Instructions on the product container prior to use. DETACK is a water based product and should not be exposed to freezing temperatures.

DETACK saves money, time and increases efficiency. No need to wait until the sealant has cooled before opening the pavement to traffic. Use DETACK in place of sand or silly toilet paper to reduce traffic control issues, shorten lane closure and wait time. DETACK is an economical, biodegradable liquid that eliminates the surface tack on freshly applied hot pour sealants. A one-man operation, with a quick spray of DETACK your pavement is ready for traffic. If you're stuck for an economical, time saving, detackifying solution then DETACK from Crafco is your answer.