Crafco Marker Adhesive
The right choice for marker application is the Crafco Marker Adhesive System. Crafco’s Marker Adhesive System includes both application equipment and

    marker adhesive.


CRAFCO Hot-Applied Bituminous Marker Adhesive
is a hot-applied bituminous material which, when properly used and applied, bonds markers and reflectors to both asphalt and concrete pavement surfaces. The adhesive is supplied as an easy to use single component material which is easily melted and poured or pumped onto pavement surfaces. Since it is a hot melt composition, the adhesive sets up on cooling and is ready for traffic in less than 5 minutes. Heating can be performed in either directly or indirectly heated melting units. The adhesive contains no rubber polymers which can degrade at application temperature.

 > Specifications <
 

Crafco Hot-Applied Flexible Pavement Marker Adhesive is a hot-applied thermoplastic bituminous material which, when properly used and applied, bonds markers and reflectors to both asphalt and concrete pavement surfaces. Hot-Applied Flexible Pavement Marker Adhesive is supplied as an easy to use single component material which is easily melted and poured or pumped onto pavement surfaces. Since it is a hot melt composition, Hot-Applied Flexible Marker Adhesive sets up on cooling and is ready for traffic in less than five minutes. Hot-Applied Flexible Marker Adhesive is formulated with premium asphalt, polymers and additives to produce a unique material which hold markers in place and remain flexible at temperatures down to 20°F (-7°C).

 > Specifications <

Quick Solutions- Stick most anything to pavement.   Three different products for three different types of applications, fast and easy.  Repair pavement cracks, adhere sign posts, and more to pavement.

>Literature<

 

 

BAX 250 Applicator

The BAX 250 will heat 250 pounds of adhesive per hour and applies 20 “shots” per minute for high application rates. The BAX comes skid mounted. Also available is a 600 pound unit for Flexible Marker Adhesive application. A 10 foot heated hose and 24” wand allows maneuverability and efficient production. Additional hose and wand options are available.

*Optional all electric, BAX100ES model also available.

> Specifications <    > Literature <