Crafco Sealant

Sealant, Patching Products, Adhesives, Detack and Cleaners
	Crafco Pavement Preservation Sealants are formulated to perform in a wide range of climatic conditions. All sealant specifications meet and exceed Federal and State recommendations. Crafco produces Roadsaver, Parking Lot Sealant, PolyFlex Sealant, PolyPatch, TechCrete, Loop Detector Sealant, Pavement Joint Adhesive, Super Flex Sealant and custom specified sealant. Crafco Certified Sealants are products by which the performance of the product has been proven by a recognized, non-biased, independent entity verifying the performance levels, and providing the documentation of the performance.
	Certification Documentation	Sealant Usage Calculator
		To determine the amount of sealant required for your project click on the sealant calculator.

NEW PLEXI-melt meltable packaging - no waste, no box recycling. Click for details.
Crack Sealant & Fillers	Crafco offers up to 100 sealant types for a wide range of application in all climatic conditions and temperatures. To make selection easy for your particular application use, click on "SEALANT SELECTION GUIDE" to the left.		SEALANT SELECTION GUIDE LITERATURE
				VIDEO
Concrete Joint Sealant & Concrete Repair Products	Joint sealant is designed to keep moisture out of the pavement sub-base, limit spalls and prevent foreign objects (F.O.D.) from pavement surfaces. Crafco has joint sealant for every use, for every climate and varying life cycles. If properly designed and installed the expected life of this procedure is 5 to 7 years in most cases. Crafco TechCrete is the long-term solution for distressed concrete pavement preservation. Spalled concrete caused by fatigue, freeze/thaw cycles, warping stress, ingress of water, or substrate problems can lead to costly reconstruction.		ADDITIONAL SILICONE INFORMATION SILICONE LITERATURE TECHCRETE LITERATURE
				Silicone VIDEO No Audio
Parking Lot Sealant	Parking Lot pavements are subject to slow moving vehicle traffic and foot traffic. These areas include but are not limited to: Parking Lots, Parking Garages, Driveways, Collector and Residential Streets, Crosswalks, Walkways and Recreation areas. Due to the nature of these types of pavements, special care should be taken when sealing cracks in these areas because they encounter different types of traffic than highways and high traffic volume roads. Crafco Parking Lot Sealant is specifically formulated for these areas.		SPECIFICATIONS
			LITERATURE
Loop Detector Sealant	Crafco Loop Detector Sealant is a single component, hot melt, rubberized asphalt material formulated to be a stiff, yet flexible, sealant which is ideally suited for sealing traffic loop detector cuts. Crafco Loop Detector Sealant is a thin, free flowing fluid which pours easily and penetrates narrow traffic loop detector cuts. This sealant is self leveling. Application use includes both asphalt and Portland Cement Concrete pavement. When cool, Loop Detector Sealant is a well bonded, stiff product that resists tracking or pick-up in pedestrian and slow moving traffic areas. Can be applied using pressure feed or pour pots.		SPECIFICATIONS


		• Single component hot melt • Thin, free flowing • Self leveling • Permanent bond • Resists tracking or pick-up • Open to traffic when cool
Patching Products	Crafco offers a wide variety of pavement patching products for asphalt and concrete alike. These performance patching products will satisfy any specific need, whether it's budget conscious, short term or long term repairs we have a product for your application. Listed is a brief description of each product, the application and use. There is a comparison chart to help you better select the proper product for your application that can be accessed by clicking the "additional information" button to the right.		ADDITIONAL PATCHING PRODUCTS INFORMATION

	TechCrete	Crafco TechCrete is a proven hot pour superior repair solution different from conventional rigid repair methods. Due to its flexibility, high tensile strength, ability to bridge joints and high compressive resistance, TechCrete creates a long lasting concrete repair.
	PolyPatch	Crafco PolyPatch has been specifically designed for cracks too large for crack sealing and distressed surfaces that are too small for re-paving. It is a versatile hot-applied, pourable, self-adhesive polymer modified asphalt binder containing selected aggregate to ensure good load bearing and skid resistant characteristics. Compounded with lightweight aggregate.
	Mastic One	Crafco Mastic One is designed for large cracks and distressed surface areas too small for re-paving. It is a versatile hot-applied, pourable, self-adhesive polymer modified asphalt binder containing selected aggregate to ensure good load bearing and skid resistant characteristics. Compounded with standard weight aggregate.
	HP Cold Patch	Whether it is repairing utility cuts or patching that reoccurring pothole, HP high performance cold patch is ideal for all weather conditions. HP is specifically formulated for the wide-ranging temperature and climate of all areas. HP is permanent, fully guaranteed against any failure, and most important, does the job right the first time.
Marker Adhesive	Crafco Hot-Applied Flexible Marker Adhesive is a hot-applied thermoplastic bituminous material which bonds markers and reflectors to both asphalt and concrete pavement surfaces. Hot-Applied Flexible Marker Adhesive is supplied as a single component material which is easily melted and poured or pumped onto pavement surfaces. Hot-Applied Flexible Marker Adhesive sets up on cooling and is ready for traffic in less than five minutes. Hot-Applied Flexible Marker Adhesive is formulated with premium asphalt, polymers and additives which hold markers in place and remain flexible at temperatures down to 20°F (-7°C).		ADDITIONAL MARKER ADHESIVE INFORMATION
			LITERATURE

Joint Adhesive	Crafco's hot-applied modified asphalt composition effectively bonds paving passes together creating a watertight seal during thermal movement resulting in improved long-term performance of the joint with no significant cracking. This product is also effective for waterproofing exposed edges of asphalt concrete pavement areas such as at the curb gutter, and shoulder interfaces. Additionally, waterproofing can be assured where manhole covers and hand valves (gas, water, etc.) are installed in asphalt concrete pavement. Like other Crafco products this product is easy to apply using Crafco's Melter/Applicator equipment.		ADDITIONAL JOINT ADHESIVE INFORMATION
			SPECIFICATIONS
			LITERATURE
			JOINT CONSTRUCTION & MAINTENANCE PRODUCTS
Detack	Open freshly crack- sealed pavements to vehicle and pedestrian traffic immediately and eliminate sealant pick-up and tracking with DETACK. DETACK is an economical, biodegradable liquid from Crafco that eliminates sealant tack when sprayed onto freshly applied hot pour sealant. Now you don't have to wait until the sealant has cooled before opening the pavement to traffic. DETACK application is a one-man operation that saves money, time, and increases efficiency. DETACK is the smart choice over messy sand, aggregate, or toilet paper applications and reduces set up and tear down time for lane closures. If you're stuck for an economical, time saving, detackifying solution for hot pour sealant then DETACK from Crafco is your answer.		ADDITIONAL DETACK INFORMATION
			SPECIFICATIONS
			LITERATURE
Qwik Solutions	QwikStix	The Crafco QWIKSTIX is a fast and easy way to adhere pavement markers or do small crack repairs. The only tool required is a small torch. Peel back the self release cardboard box and melt just enough to do the job. Single markers or touch up to a crack sealing project are ideal for the QWIKSTIX. QWIKSTIX work equally well on AC or PCCP pavements.	LITERATURE
			QWIKSTIX SPECIFICATIONS
	Qwikdots	Use the Crafco QWIKDOTS system to adhere sign posts, rumble strips, speed bumps, parking bumpers, temporary signs or most anything else to both concrete and asphalt pavements. Crafco QWIKDOTS are pressure sensitive peel and stick modified asphalt adhesive pads.	QWIKDOTS SPECIFICATIONS

	QwikSeal	QWIKSEAL is a peel and stick, modified asphalt compound ideal for sealing cracks, seams around pavement patches and concrete joints. Applying QWIKSEAL is as simple as blowing the pavement making sure the surface is clean and dry, unrolling QWIKSEAL and applying it to the surface. Warm the edges to assure a long lasting bond. Properly installed, QWIKSEAL prevents water intrusion and the deterioration it causes to the pavement. QWIKSEAL is compounded to perform in a wide range of climates and conditions.	QWIKSEAL SPECIFICATIONS